Professional Multi Battery LED Hybrid work light 10050 MH (LED site light 100W, 12500lm, IP55, work light compatible with 18V batteries 11 different manufacturers, 5m RN cable, without battery, Engineered in Germany)
Description
Thanks to the brennenstuhl® Multi Battery 18V System, the extremely robust and bright Professional Multi Battery LED battery work light with 100W power is compatible with different 18V batteries (various Ah classes) from the eleven power tool manufacturers Bosch Professional, Dewalt, Einhell, Fein, Festool, Flex, Hikoki, Makita, Metabo CAS, Milwaukee and Würth. So no matter which battery system is already in use, the interface technology enables maximum flexibility and it is possible to fall back on the battery system of one's choice. The matching adapter can be inserted into the interface with just a flick of the wrist. Brennenstuhl is part of AMPShare - Powered by Bosch Professional. The AMPShare battery alliance enables the use of brennenstuhl® work lights with the 18V rechargeable batteries from Bosch Professional. LED construction light with 12500 lm offers optimum light distribution through large-area illumination with glare-free and impact-resistant working light. The impact-resistant construction spotlight can be used flexibly and as required, whether standing upright, lying flat for wide-area illumination or mounted on a tripod. The impact-resistant work spotlight with enormous luminosity can be controlled by battery and mains operation thanks to hybrid technology. Even in the event of a power failure, the LED spotlight ensures safety by automatically switching from mains to battery operation. Furthermore, it has a battery status display for the remaining energy of the batteries used (the batteries must be charged externally) and a protection system for Powertool batteries. This protects the batteries from deep discharge and overheating (caused by high load currents). In addition, the Multi Battery LED site light with hybrid technology convinces with the following features:
- With plug-in cable connection and 5m detachable cable (H07RN-F2X1.0)
- With on/off switch
- LED spotlight with anti-tilt protection, protects working light and housing of the spotlight
- With bright SMD LEDs
- Ergonomic handle
- Tripod mounting possible
- Light duration depends on the battery used:
approx. 16 min/1Ah at 75% light output,
approx. 24 min/1Ah at 50% light output,
approx. 48 min/1Ah at 25% light output
- With 4 switching levels (100% - 75% - 50% - 25%), direct full power when switched on
- Power consumption: 100W
- Luminous flux: 12500lm
- Protection class: IP55
- When using 18V batteries of higher Ah classes without battery protection cover IP20
- Impact resistance: IK08
- Protection class: III
- Category 2 (K2) equipment: Use for harsh environments with high mechanical, physical and chemical impact
Technical data
- Cable designation: H07RN-F 2X1,0
- Cable length: 5 m
- Cable quality: Rubber-Neoprene, Rubber-Neoprene
- Type of lamp: Floodlight
- Housing material: Plastic rubberised
- Luminous flux: 12.500 lm
- Nominal frequency: 50/60 Hz
- Protection class: II
- Type of input voltage: Alternating voltage (AC)
- Max. Nominal input voltage: 240 V
- Min. Nominal input voltage: 220 V
- With on/ off switch: Yes
- Degree of protection (IP): IP55
- Impact strength: IK08
- Colour rendering index: 80
- Energy efficiency class: E
- Standby power: 0,47 W
- Lifetime (L70B50): 30000 h
- Height: 25,80 cm
- Length: 17,70 cm
- Weight: 4,73 kg
- Width: 35,40 cm
- Voltage: 18 V
- Colour temperature: 6500 K
Scope of supply
Professional Multi Battery LED Hybrid work light 10050 MH, 4 interface adapters, bag for adapters, 5m detachable cable H07RN-F2X1.0
